Journal of Advanced Ceramics


mechanical characterization, micromechanics, indentation, phase transformation, edge fracture (EF) method


An unconventional method for determining the fracture resistance of brittle materials is discussed. This method employs a conical indenter to chip the rectangular edge of the specimen. Particular features of the method are the use of small specimens and the evaluation of the resistance of materials to the nucleation, initiation and propagation of a crack. It is shown that this method is somewhat similar to the Hertzian fracture method and to the way that early man selected stones to make tools and weapons. Measured data of the fracture resistance of ceramics is presented. It is confirmed that if a ceramic material is similar to the model material of linear elastic fracture mechanics (LEFM), then those fracture resistance values are directly proportional to the critical stress intensity factors (baseline). For elastic and inelastic ceramics, R-lines characterizing the fracture resistance to crack growth are plotted. It is shown that proportionality lines (edge chipping resistance versus critical stress intensity factor) may be straight lines for ceramics with similar structure (such as Y-TZP and Mg-PSZ). The effect of rounding of the conical indenter tip (10–800 µm) on chip scar shape is indicated. Other aspects in the fracture behavior of ceramics during edge chipping are also analyzed. The advantages and disadvantages of the method are discussed. Further studies in this mechanico-physical research area are suggested.


Tsinghua University Press